[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ignition switch mechanism / 5ktq assembly wanted

To: quk@isham-research.demon.co.uk (Phil Payne)
Subject: Re: Ignition switch mechanism / 5ktq assembly wanted
From: Andrew Duane USG <duane@hunch.zk3.dec.com>
Date: Thu, 18 Mar 1999 10:24:57 -0500 (EST)
Cc: quattro@coimbra.ans.net (Quattro List)
In-Reply-To: <6837@isham-research.demon.co.uk> from "Phil Payne" at Mar 18, 99 02:43:54 pm
Reply-To: duane@zk3.dec.com
Sender: owner-quattro@coimbra.ans.net

Hairy green toads from Mars made Phil Payne say:

> Spares are available (distinguish between key profile AN and AH when
> ordering) and the whole thing _can_ be dismantled.  The instructions are
> not in the factory manuals, but they _are_ in the Haynes manuals - the
> procedure involves drilling a whole at a precisely measured place on
> the outside of the lock.

It's in *some* of the Bentleys. I think one of my three has it.

-- 

Andrew L. Duane (JOT-7)			duane@zk3.dec.com
Compaq Computer Corporation		(603)-884-1294
110 Spit Brook Road
M/S ZKO3-3/U14
Nashua, NH    03062-2698

Only my cat shares my opinions, and she's too psychotic to express it

References:
- Re: Ignition switch mechanism / 5ktq assembly wanted
  - From: quk@isham-research.demon.co.uk (Phil Payne)

Prev by Date: RE: Bosch +4's in MC motor (observations)
Next by Date: Re: Ignition switch mechanism / 5ktq assembly wanted
Prev by thread: Re: Ignition switch mechanism / 5ktq assembly wanted
Next by thread: Re: Ignition switch mechanism / 5ktq assembly wanted
Index(es):
- Date
- Thread