Re: HELP - '84 5kS won't start after distributor work...

["Cobram ." <cobram@juno.com>]

Hi Benedikt:

See if  you have spark first.  The rotor, is it a Bosch  
OEM style you replaced it with, did you compare the 2 to see if
they were the same?  Are you getting power to the coil and 
spark out of the coil?  

Did you replace the black isolator plastic disk that goes in the
distributor?  Check to see if the distributor is seated all the 
way down.  

Once you get it running again  I'd also recommend bringing 
the engine to TDC, aligning the distributor and  timing it, as 
it's tough to eyeball exact distributor replacement.

BCNU,

Cobram@Juno.Com
http://www.geocities.com/MotorCity/Flats/1469/
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]