Re: Aftermarket body tin for Audis

["Cobram ." <cobram@juno.com>]

Tom Nas <Tom@interes.nl> writes:

>http://www.veng.dk/car/vendors/00a.html
>
>Tom
>

Caveat Emptor with this sheet metal.  It's not even CLOSE to the quality
and fit of the OEM body panels.  Personal experience is with their
fenders for the 123 Mercedes, the bolts didn't quite line up, and the
fenders were completly rotted through within 2 years.  Price difference
was not that great either, when you take into account the paint/prep
necessary to repair in the not too distant future.  FYI the OEM Mercyless
Benz fenders were $238 and the Veng's were about $127.  These are great
if you're going to sell the car soon, but the folks on this list seem to
hold onto them forever.  This is one of the FEW times I'd say bite the
bullet and go for an OEM part  if you plan on keeping the car.

BCNU,

Cobram@Juno.Com
http://www.geocities.com/MotorCity/Flats/1469/

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]