Re: cold start problem - interim report

["Stephen Bigelow" <sbigelow@sprint.ca>]

Nope....coldstart valve only operates while cranking.

What is the warm-up regulater equivelant on those cars?
I'd look there




>I'm guessing the cold start valve.  Anyone else?
>
>Love, Like, or Just Plain Tolerate,
>
>Timothy
>
>
>
>On Sat, 3 Apr 1999 17:16:23 EST Fourkguy@aol.com writes:
>>86 4KCSQ - constant stall at start up until finally holds ignition.
>>
>>What I've done so far:
>>
>>Repair fuel line leak caused by corrosion.
>>Replace Coolant Temp Sensor.
>>Replace all plugs with Bosch Platinum +4 4 electrode plugs
>>Replace cap & rotor
>>Check for vacuum leaks.
>>
>>Current status:
>>
>>Much improved. Car starts on first try but stumbles until warm. This
>>happens
>>hot or cold when the car has been off for more than 1/2 hour.
>>Could it be : Leaky injector?
>>               Fuel Pressure accumulator?
>>               What else??
>>
>>Please point me in the right direction.
>>
>>Thanks,
>>
>>Jeff
>