Re: Boxster brakes for 4KQ to be done....

[Gary Erickson <erickson@teleport.com>]

Martin Pajak wrote:

> Maybe the S4/S6 rotors but not 1990 Coupe Quattro.This is what was used on ex.
> Duane Hale's 4kqt.

I've never seen a set of the S4/S6 rotors, but I can say for certain
that the CQ rotors are too deep to fit a 4kq/GT unless different hubs
are fitted.  I was pursuing a similar project a year ago and actually
purchased a set of CQ rotors for measuring and to test fit.  No dice,
they didn't work.

I know the fellow who now owns Duane's old car.  Pete, can you
confirm/deny what rotors are on the car?	

> Same goes for the VW Corrado G60 with 4x100 patter (you would need to redrill the
> rotor).

Now that's not a bad idea.  Lots of different rotor styles
(cross-drilled, vented, etc.) available, and I would think that it would
be easier to drill the 4x108 pattern between the 4x100 hole than it
would be to squeeze them onto a 5x112 rotor.

Thanks for the info, Martin.

-Gary

'84 4kq
'85 turbo GT coupe
'89 200q