[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

how do i increase pre-load on the wastegate spring?

To: <quattro@coimbra.ans.net>
Subject: how do i increase pre-load on the wastegate spring?
From: Michael Williams <urquattro@surfree.com>
Date: Sat, 17 Apr 99 13:06:29 -0700
Sender: owner-quattro@coimbra.ans.net

hey all, i want to increase the preload on my wastegate spring just a 
little bit.  Its only boosting about 11.5 psi, and i want to bump it up a 
couple psi, and im not quite sure how to do that.  

anyone have a simple procedure?

later...

Michael Sheridan Williams
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 16x7.5 OZ Mito's w/ SP8000's, K&N
1985 4000S Quattro miles, Koni Yellows/Coilover (2B), strut brace, Sport 
8000 Tires, K&N
http://members.aol.com/daserde2

Follow-Ups:
- Re: how do i increase pre-load on the wastegate spring?
  - From: Robert Houk - WorkGroup Server Firmware <Robert.Houk@East.Sun.COM>

Prev by Date: Needed Wheels
Next by Date: Re: Dead Ur quattro - latest
Prev by thread: Re: Special tools
Next by thread: Re: how do i increase pre-load on the wastegate spring?
Index(es):
- Date
- Thread