timing belt

[Mike Mulholland <meyeke@netinc.ca>]

paul W said ..line up the mark on the lower pulley with the mark on the
timing belt cover...this does _not_ always work!! on my 5kcdtq the mark on
the lower pulley was so far off it pointed to the centre of the idler wheel
bolt. i verified tdc with a brass rod in the sparkplug hole of #1, the "0"
on the flywheel, and the dimple on the camshaft. once happy that all was
well, i marked the lower pulley correctly.
hth
mike
86 5kcdtq, tap chip sjm spring
84 5ks
84 5ksw
many cyclops bicycles