[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Timing belt tricks

Andrei said;

snip

> Last time I did the TB, I broke the 1/2" craftsman breaker bar. It handled
> the job twice before. One probably needs at least  a 3/4" one .
> 
> 
Saw Mike SHATTER a 1/2" Snap-on breaker bar doing a timing belt.  Most of
the pieces were smaller than a marble.  Yikes.  He agrees with the 3/4"
philosophy (and the tool).
Gary