Re: Ur-Q hydraulic head conversion questions...

["Frank J. Bauer" <frankbauer@thevine.net>]

At 07:22 AM 4/20/99 GMT, Phil Payne wrote:
>That engine had a solid lifter head with an air shround fitting.
>Unfortunately, the WR's inlet manifold doesn't have the cast-in air
>passage to supply it.

you could tee into the wastegate supply line to provide a supply to the
injector air shrouds.
that's the way it is "plumbed" on my kg.
btw my wastegate, isv and air shroud are all supplied from the "third port"
on the intercooler...

frank