[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Clutch pedal "sticking"



Andrew Duane USG writes:
 > My old 100Q has developed an annoying problem.
 > 
 > If I push the clutch pedal more than 1/2-3/4 of the
 > way down, it will stick down. Getting a toe underneath
 > it and pulling it halfway back up will make it pop back
 > just fine. Otherwise, clutch operation is normal.
 > 
 > Return spring? Slave cylinder?

My memory say's that most of these "clutch pedal sticking down"
incidents reported to the list were solved when the clutch master
cylinder was replaced. I know of at least one case personally where
someone had these symptoms with a 4KQ and the slave cylinder change
did not fix the problem.
HTH and that my memory isn't playing tricks on me again.

David