RE: 4000 turbo rotors

["Bruce Bell" <bbell04@ibm.net>]

> 	According to Mark Chang's web site (address already provided by
> several listers...yikes!), none of this should be
> neccessary.  The hubs and bearings are the same...
> javad
> 86 coupe GT

Then do a visual check before spending your money. The Hubs, bearings and
axles on an 80/90 are *very* different than those on the CGT.

Consider this, the CGT has a 68mm WB (39 mm ID)  VS the 80/90 with a 75 mm
WB (42 mm ID). Also, your axles use a nut for the hub rather than the bolt
as used on the 80/90.

Good luck.

Bruce