Re: G60 brake conversion on '90 90Q20v

["----> Bob" <mx@snet.net>]

Bruce Bell wrote:
> 
> Just as Brendan Rudack has mentioned, use of that rotor will require the
> caliper to be backspaced. I think Brendan told me a couple of years ago that
> this rotor has a hat size of approx 28 mm. You may want to try the rotor
> from a 5000tq as it has a smaller hat size (22 mm) and may work. Or be too
> far off in the other direction. Re-drilling the rotor for 4 bolts if it
> works is not a big deal.
> 

No! No! no!
Do NOT use spacers on your rotors.. this is a really bad way to do
things... Use the CORRECT ROTORS!

The 5000TQ rotors are 5 lug... in that case you ARE better off using
spacers, since getting one from a 5000TQ to fit would be a REAL hack!!!!

893 615 301 is correct. 4 lug 276mm.

Bob