[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: ignition upgrade



On Wed, 5 May 1999, Javad Shadzi wrote:

> 	Yes, but even with a cam you'd have to admit the hp gains would be
> marginal.  Is it worth $300 for 3hp at 5500 rpm and a little better
> throttle response?

	$300!!!!   Jeesh.  You can have a machine shop do it for under a
$100.  $300 is WAY to expensive.

>  I read a test on the A4 TB, and the biggest change 
> they noted, for their $400! was increased throttle repsonse.  Like Ive
> said before,

	To much.  My friend got Cone Filter and TB for about that if I
remeber right.  Did it seperately to.  (On an A4 12v)  Cone made a
difference.  Then add TB and it made a HUGE difference.  Pulled MUCH
stringer from 4k on to Redline and Throttle Response was better as well.
I know its seat of the pants but Everyone Noted the difference.  It was
blatantly obvious.  

> I ported my head and did a cam
> all for under $400(http://web.csuchico.edu/~javad), and that is the kind
> of power Id like to spend my money on ;)

	Cam for under $400.  wow.  I'll have to check out the site.
thanks.
	BTW:  I'm porting my head in about 2 weeks.  :-)
L8R
	Todd