[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Solder vs. Crimp
So, Phil, how frequently does one have to rewind the rear calipers on an
ur-quattro while out "tooling around" the relatively confined spaces of
your island? And do you carry a 12V-powered compressor to operate the 4 mm
impact driver?
More seriously, can you provide an indication of the purchase prices of the
tool kit?
Thanks, Kneale
At 10:03 AM 5/10/99 +0000, Phil Payne wrote:
>I suppose it's generally known that I try to carry as complete a tool
>set as possible in as small a space as possible. The boot space in an
>ur-quattro simply redefines "small".
>Working around the rest of the picture ...
Snip
>The odd driver down at the right is a chopped-off Sealey brake retractor
>cube welded to an old (found in the gutter) Snap-On 3/8" extension.
>Winds ur-quattro rear brake calipers back in seconds. The one thing
>so far not mentioned, the 4mm Allen impact driver at the upper left, is
>just the most ridiculous thing I ever used. But it works.
>
>--
> Phil Payne