Re: Cold Fresh Air(where can I get it?!?!)

[c a l i b a n <caliban@sharon.net>]

	rick zehr did some mods to his air intake, something
	he changes seasonally. 

	otherwise, plastic hose is a fine idea, all you need 
	to find is the right material.  i have heard good things
	abou;going to diesel motor shops for materials.

On Thu, 13 May 1999 PlyBoyDoct@aol.com wrote:

]Hi Q-brains,
]
]I don't know if people realize, but the 200t10v engine design was made pretty 
]poorly.  (Sorry if this was discussed b4)  The Turbo, Intercooler, Airbox are 
]in the same Corner.  I mean, I'm no Super Sport tech or nothing, but doesn't 
]the car preform better with COLD air instead or hot?  I have tried running a 
]Plastic flexie Hose to the Airbox but only succeeded with a melted hose.  
]Does anyone have any idea I can increase maximuim cold air intake?  There is 
]virtually no room under the hood,  Everything is evenly spaced 2 inches from 
]each other =) .  My 97 prelude intake has a hose that run under the Airbox to 
]another airbox then to the outside.  Very good idea.  I am considering 
]cutting a hole under the airbox on my 200.  Can someone give me some idea's 
]b4 I start burning holes in my car?  TIA
]
]Jason C
]89 200t10v
]Redmond WA
]


--
 rocky mullin
 http://caliban.sf.ca.us/
 two strokes are faster than four!
 this message was composed using the vi editor.
 '83 ur-q - yamaha rz350 - suzuki ts250 -  chaotic good