RE: Afterrun coolant pump Chevy part?

["Avi Meron" <avi@cosmoslink.net>]

Don't loose it again.....
Avi

This is a repost if I missed something let me know..


* The pump is a 12Volt coolant pump and is designed to act as a water pump
for a small block Chevy,
* Electrical draw is under 10AMP and when the coolant is hot the electrical
draw is only 2 AMP, as a comparison, the draw on the rad. fan (at the lowest
speed) is between 11-13 AMP
* The pump is NOT magnetically driven, it is driven by a shaft with a high
temperature impeller (when you get the pump you get 2 spare impellers)
* Dia. of the pump is app. 2.5" and length is under 6"
* The pump section is all SS
* The flow capacity of the pump is many time over the Audi pump (designed to
replace the water pump on a small block Chevy)
* The pump will  fit very nicely in the same location of the old pump
* I wired it with a relay just to be on the safe side, did not trust the
"chintzy" OEM wires, the pump has continues 12Volt and the ground is
activated when the pump is on (OEM set-up), you have to wire it accordingly,
no big deal
* the pump runs noticeably less time than the OEM pump, probably because it
is a REAL pump not a "piss poor" (engineering terminology) excuse for a pump
* cost for the pump is about $90 and Shogun has them (they are on the net),
I will dig the phone # for who ever wants it, the company is located in
Prior lake MN 1 800 527 5665 tech line # is 612 447 6784

I think I covered everything, did I miss something Frank? If I did let me
know.

Avi


-----Original Message-----
From:	owner-quattro@audifans.com [mailto:owner-quattro@audifans.com] On
Behalf Of Stephen Bigelow
Sent:	Monday, June 07, 1999 3:11 PM
To:	Renier Meyer; quattro@audifans.com
Subject:	Re: Afterrun coolant pump Chevy part?

It's used for drag racing...they don't want they drag of a constant pump,
and don't need the water flow for a quick run.

Check a shop that deals with "those guys".



>I have looked through my old digests and cannot find the posting with
>the
>small block Chevy coolant pump number. Stainless impeller < 10A etc.
>etc.
>
>My local Chevy / Ford V8 supplier says he has never used such a pump.
>
>I am looking for the part number, source or a pump at a good price.
>
>Anyone who can  help?
>
>TIA
>Renier Meyer
>89 200T with stuffed after run coolant pump.
>84 100
>