Re: Port & Polish vs. Extrude Hone

["Robert B." <robbrauns@bb.eulink.net>]

Hi Javad:

Thanks for your input. The 20V stroker crank is available from Schröder
Motorsports here in Germany for about $1500, but someone told me that the crank
from a 2.5L 5 cylinder VW-Eurovan will fit in the 10V and 20V 5 cylinder Audi
engines. I am checking that to see if that's true. If that crank works, I should
be able to find one here cheaper than $1500.

Before I swap engines, I plan on doing the G60 brake upgrade, since the car I am
getting needs new front pads and a wheel bearing anyway.

Kind Regards

Rob
85 QC in 2 weeks!

JShadzi@aol.com schrieb:

>         Extrude Honing is the way to go, but if you are willing to part with
> a serious chunk of money. ..Where do you plan of getting the stroker crank?
> Let me know how your project comes along ;)
> Javad Shadzi
> 86 coupe GT