Re: Suspension bushings advice needed

["Jim Haseltine" <Jim@ur-q.freeserve.co.uk>]

-----Original Message-----
From: Phil Payne <quk@isham-research.demon.co.uk>


>In message <37624918.C1E440BE@bb.eulink.net> "Robert B." writes:
>
>> I read a post about using the stock rubber suspension bushings wearing
>> out on my 85 CQ. (Same front end as the 85-87.5 CGT).Then someone said
>> polyurathene bushings are available, but sqeek!
>
>Stock bushes are fine, IME, as long as the instructions to tighten them
>while the weight of the car is on its wheels are followed.
>
On a slightly different subject, are the front and rear wishbones on an Ur-q
interchangable? They certainly look like they are. I've just fitted two new
ones at the front and reckon that the bushes in the rear wb will probably be
just as bad, so I could fit new bushes in the wishbones that I just took off
the front and fit them to the rear.

Could I?

Jim Haseltine