Re: Attack that Rack.

["Cobram ." <cobram@juno.com>]

On Sun, 20 Jun 1999 15:13:14 -0400 "Erskine" <erskine@brevard.net>
writes:

>I am about to attempt this job, I had heard that it was critical to 
>replace
>all high pressure hoses when you change the rack.  Does anybody have
>experience with this requirement?  Is the warranty void if you don't?

There is usually an instruction sheet supplied with the new rack on how
to check your pump, and run the fluid through a coffee filter to see if
there are any metal particles in the fluid, and flush same.  If the lines
aren't leaking, I don't see the need to change them.  DO however get new
copper washers and O-rings for banjo fittings on the hoses you're going
to re-use.  A couple of fuel line rated clamps to replace the old ones on
the reservoir bottle might be a good idea too.

BCNU,

Cobram@Juno.Com
http://welcome.to/AudiV8Quattro

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.