[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Bearing removal

I have found the clutch alignment tool (used when aligning the pressure 
plate, clutch disc, and pilot bearing hole in the bolting the pressure 
plate to the flywheel step of clutch replacement), is usually the perfect 
size for pilot bearing removal with the hydraulic grease method.  The 
plastic one included in clutch kits is the one I am referring to.  If it 
has a finger loop in the end, it can usually be removed with a little 
judiciously applied force. (Or saw it off)

George Selby
78 F-150 400M, 4 on floor, 4x4
86 Audi 4000CS Quattro
IsuzuG@prodigy.net