Re: ETKA question

[tm2@earthlink.net]

Kneale Brownson wrote:
> 
> Is there a way to adjust the paper parameters so ETKA will print within the
> 8.5 X 11.0 standard?
> 
> Thanks, Kneale Brownson
> 
> At 08:22 AM 6/23/99 -0400, Paul Wilson wrote:
> >> I downloaded ekta_all.zip, unzipped it to a temp directory on my
> >> hard drive
> >> and copied the files with the structure intact to the CD.  I did
> >> the install using
> >> the option that keeps the data files on the CD.  It works great
> >> except when I
> >> print.  It seems to expect a sheet slightly longer than the 11"
> >> standard.  I am
> >> running Windows 98.  Just a note, Winzip must be used to unzip.  PKzip204g
> >> complained about the number of files and quit.
> >
> >There's more than one standard.  It's expecting an A4(no pun intended) size
> >sheet which is the standard in Europe.  Look at a European magazine at
> >Barnes & Noble and you'll see the size.
> >
> >Paul Wilson
> >98.5 A4 1.8TQS
> >
Kneale

Go to the printer then to propertries setup to set page format and you
will see envelope
 and letter sizes.  Standard letter size is all the way to the left past
A4.  Use the left arrow and scroll to the left and you will see Standard
letter. That is the correct
 format for a 8.5 by 11 letter.  Everytime I printed I had to set it to
this letter size 
because it would not stay there after each printing.

Hope this is your problem.

Pat Korach
Kirkland, WA