Re: Where *is* the low pressure AC port?

[Scott Mockry <scottmo@teleport.com>]

Kurt asked:
>Ok, got some injectable oil for the AC system on my 89 200 TQ.  Where's =
>the low pressure fitting?  Is it the one up front near the radiator, or =
>under the cover behind the firewall?

The high pressure fitting is on the line that is underneath the plastic
cover in FRONT of the radiator/condenser. The low pressure fitting is on
the compressor  (manifold) for the Sanyo compressors. I replaced the
compressor on a 1989 200TQW this past week. The A/C connections (low and
high pressure) were in the same location on the system I removed from a
1987 5000TQ even though there was a small change to the condenser and high
pressure line configuration between the 1987 and 1989 system.

HTH
Scott Mockry