[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Vacuum port DIA needed.

To: Scott Mockry <scottmo@teleport.com>
Subject: Re: Vacuum port DIA needed.
From: Igor Kessel <four_rings@worldnet.att.net>
Date: Mon, 05 Jul 1999 15:56:05 -0400
CC: Audi Q-list <quattro@audifans.com>, Audi S-list <audi-s-cars@emailsol.com>
References: <A9311241607548974653.SCOTTMO@TELEPORT.COM> <4.1.19990704170559.0170ec70@mail.teleport.com> <4.1.19990705112248.01763b60@mail.teleport.com>
Sender: owner-quattro@audifans.com

Scott Mockry wrote:

> I checked the fitting size on the S4/S6 ECU vacuum/boost port with a more
> accurate set of vernier calipers, and the port OD is 0.182 inches which is
> closer to 4.6-4.7mm.

Aha! So I can use the 3/16 fittings which exist in a variety of shapes
in McMaster. You have just made my day. Thanx!
The 0.182" was measured between the crests or the valleys on the barbed
nipple?

-- 
Igor Kessel
Two turbo quattros.

Follow-Ups:
- Re: Vacuum port DIA needed.
  - From: Dwayne Cosby <dccosby@interlog.com>

References:
- Re: Vacuum port DIA needed.
  - From: Scott Mockry <scottmo@teleport.com>

Prev by Date: RE:Warm Up Hesitation
Next by Date: Re: Vacuum port DIA needed.
Prev by thread: Re: Vacuum port DIA needed.
Next by thread: Re: Vacuum port DIA needed.
Index(es):
- Date
- Thread