87 4KCSQ stalling problem...

["Polletta, Jon" <polletta@cabletron.com>]

	Replaced the top of the air box with the air/fuel meter due to
sticky platen arm and cured cold start troubles. The problem now is that
when I push in the clutch while driving, the RPM's fall below idle and the
car stumbles - one out of five times the car will stall.
Checked ISV and vacuum lines and couldn't find any problems. Could the
spring clip below the platen not be high enough? I imagine it has to do with
the new meter, but at startup or at rest, there are no problems - only while
moving...

	Any ideas or suggestions would be appreciated. Thanks!

	Jon

------------------------
Jon Polletta
polletta@cabletron.com

1987 Audi 4000CS quattro