[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

More 4kq rear brake issues

To: "Audi list (E-mail)" <quattro@audifans.com>
Subject: More 4kq rear brake issues
From: PN <pajono@ctconnect.com>
Date: Tue, 20 Jul 1999 20:43:34 -0400
Reply-To: "pajono@ctconnect.com" <pajono@ctconnect.com>
Sender: owner-quattro@audifans.com

OK, turns out the hex key needed to screw my rear calipers back in is 
indeed a 12mm, the hole was just all gunked up. Now the next problem: I 
can't get the piston to go back in. Bentley says turn clockwise with firm 
pressure. I can turn it, but it won't slide in.. Any BTDT? I'm wondering if 
the parking brake is causing it not to move in? Is it worth disconnecting 
it?

Thanks for any help.
Paul
87 4kq
86 944

Prev by Date: Subject: 20V (RR, 3B) inlet manifold removal
Next by Date: Re: 5k strut removal --- lower control arm joint fused to strut?! <solution>
Prev by thread: Subject: 20V (RR, 3B) inlet manifold removal
Next by thread: RE: More 4kq rear brake issues
Index(es):
- Date
- Thread