Re: Strut brace adjustment?

[Wolff <quattro200@earthlink.net>]

> Many btdt, push it apart.  The reason for the brace is to keep the shock
> towers from closing in on each other during hard cornering.  If you've
> already done hard cornering they are already out of spec.  I'd push them
> apart as far as you can with a wrench (hand at the head of the wrench), and
> take it in for an alignment.  If you can't get enough negative camber
> (there's a concept) loosen the brace a little.  You will be amazed on how
> much you can really push the towers around if you do it on the alignment
> rack, +/- up to 2 degrees IME.
> 

Why do the towers push in towards eachother? Why wouldn't one push in
while the other pulled out?
Wolff