[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 4KSQ CO Adjustment

Hi Shayne,

I think you will need a gas analyzer, even  just a quarter turn makes a lot of difference. Sounds to me like it's the idle adjustment screw, is it made out of brass? If you screw it all the way out it should have an O ring on it and have a pointed end. Beware Audi don't sell the O rings. Did you see my post yesterday on cleaning throttle bodies? Well worth doing your car is very similar to mine ( Coupe Q).

Mail me if you want to know anything else.

Best Regards

Iain

		-----Original Message-----
		From:	Romeo Shayne Pavlic' [mailto:bcpi@arias.net]
		Sent:	29 July 1999 08:33
		To:	Audi Quattro
		Subject:	4KSQ CO Adjustment

		Is there anyway to get the CO adjustment close without using a gas analyzer
		(something I don't currently own)?  Also, what is the adjustment screw on
		the top of the intake manifold right under the throttle linkage?


		TIA, Shayne.
		--


		************************************
		*  Romeo Shayne Pavlic'            *
		*  PO Box 19284                    *
		*  Spokane, Washington 99219-9284  *
		*                          U.S.A.  *
		*                                  *
		*  Phone:  509.838.2676            *
		*  Fax:  509.838.2676              *
		*                                  *
		*  bcpi@arias.net                  *
		************************************

		Parting:  1972 Mercedes Benz 280 SE 4.5

		Girlfriends Buick 4 Sale:
		http://classifieds2000.com/cgi-cls/ad.exe?P1+C14+R716436

		Need a Mac?
		http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=138017521