[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Shogun Pump Wiring

To: <Eric_R_Kissell@email.whirlpool.com>
Subject: RE: Shogun Pump Wiring
From: "Avi Meron" <avi@cosmoslink.net>
Date: Wed, 4 Aug 1999 22:36:39 -0700
Cc: "Quattro" <quattro@audifans.com>
Importance: Normal
In-Reply-To: <00152639.C21405@email.whirlpool.com>
Sender: owner-quattro@audifans.com

You can, but don't try the pump without pressure in the coolant system. the
load is too high and it will pop the fuse.
Let us know how it works,
Avi

-----Original Message-----
From:	owner-quattro@audifans.com [mailto:owner-quattro@audifans.com] On
Behalf Of Eric_R_Kissell@email.whirlpool.com
Sent:	Wednesday, August 04, 1999 4:41 PM
To:	quattro@audifans.com
Subject:	Shogun Pump Wiring

Can I wire the Shogun after run pump without using a relay?

How do I wire this Shogun pump?

Eric R. Kissell
1986 5000cstq, 1.8 bar

References:
- Shogun Pump Wiring
  - From: Eric_R_Kissell@email.whirlpool.com

Prev by Date: RE: Very nice 20Vt ur q site...
Next by Date: RE: I-5 Lifters and Marvel Mystery Oil
Prev by thread: Shogun Pump Wiring
Next by thread: Re[2]: Shogun Pump Wiring
Index(es):
- Date
- Thread