Thank you Stott Hare and Ti Kan and Huw Powell AND Dave Lawson

[Michael Williams <mike@urquattro.com>]

Hare,Stott (X) decided to speak these words:

>90% sure you have the high, low and ground connectors in the wrong places
>for the H4 bulb.  Mix them up, and they will appear to work, but you create
>ground loops and other weirdness.  You switch on your H4s, but you're using
>the low and high beam wires (no ground), so the power travels over through
>the H1 bulb to find ground, lighting the H1 dimly.


Thank you to these guys for figuring out what the problem was.  I had 
wired the thing backwards.  I got dislexic and confused cause i was 
working from the top of the lights while they were mounted facing the 
opposit direction.

I appologize for insisting that i had the wiring right when i had 
obviously not done so...

Thank you for everyone who put in their ideas.  I really love this list...

I just ordered a real wiring harness from 2bennett.  My friend Mike 
Robinson (on this list) has the H4/H1's in his 90Q with their harness.  
When i was looking at it last night, i was very impressed with the 
quality of the workmanship and the detail that it has....plus, it is 
clean and looks good.  

Thanks again all...


later...

Michael Sheridan Williams
San Francisco, CA
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 2B Coilover, 16x7.5 OZ Mito's w/ Yoko 
A520's, K&N
1985 4000S Quattro, Koni Yellows/Coilover (2B), strut brace, Sport 8000 
Tires, K&N
http://members.aol.com/daserde2