Re: Multiple probs-reply

[John Larson <jdlarson@ix.netcom.com>]

Right you are. Just read them off the box. Ordering from the 191 number
would be most appropriate, and any GOOD foreign car parts store and
counter man would be able to get you the right one. For 99% of our
applications, we always use the correct (factory) temperature range.
Choosing one that's too cold leads to a myriad of other problems.
John

Autobahn01@aol.com wrote:
> 
> In a message dated 8/18/99 8:28:42 PM Eastern Daylight Time,
> jdlarson@ix.netcom.com writes:
> 
> > The part numbers
> >  on the box for the 3 pin unit are "191 959 481 C" and "321 959 481".
> >  Same part, 2 different numbers.
> 
> Might have to be careful using that 321 959 481 number. It should have a
> letter on the end that'll spec 2 vs 3 pin and the temp setting.
> 
> 481E---2pin 95deg
> 481H--3pin 85deg
> 481D--3pin 95deg
> 
> Regards,
> Chris Semple
> '87 4000q
>    '84 4000q
>        '83 ur-q
>            '83 ur-q --For Parts--
>                '88 5000tq Avant--For Sale--