Help with window mechanism.

["John D." <JDinNJ@earthlink.net>]

 The driver's window on my '91 200TQ wouldn't go back up today.

I removed the door panel and found that the cable had gone back up

but the window stayed down. This was because the hexagonal block that is

crimped in the center of the cable had pulled out of the part that rides in
the

track and attaches to the window. I know this part will probably have to be

replaced but I cannot see how to remove it from the track (problem 1).

Problem 2 is that when the cable went all the way to the top it must have

gone past its normal stopping point and the end of the cable that goes into
the

bottom of the regulator has pulled out. It still has the small block crimped
to the

end but I don't know how to reconnect it inside the regulator.

Also, does anyone know if these parts are sold separately, or do you have to
buy

the whole thing (cables, regulator and motor)? Thanks in advance for any
help.

John