[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: project 4ktq update: Sent the motor out to the shop.

To: "'The Murphy-Fahlgren Family'" <efhome@master.adams.com>, "'Marc A Swanson'" <mswanson@cisunix.unh.edu>
Subject: RE: project 4ktq update: Sent the motor out to the shop.
From: "Bruce Bell" <bbell04@ibm.net>
Date: Thu, 2 Sep 1999 05:55:36 -0600
Cc: <quattro@audifans.com>
Importance: Normal
In-Reply-To: <37CDA8A6.17310FF2@adams.com>
Reply-To: <bbell@surview.com>
Sender: owner-quattro@audifans.com

My BTDT disagrees with this recommendation.  Should the harmonic balancer or
the flywheel ever need replacing then the whole motor would need
re-balanced. If the parts are balanced properly separately, then they will
be balanced together.

Bruce


>
> Make sure the machinists balance the crank/harmonic balancer with
> the flywheel attached.
>

References:
- Re: project 4ktq update: Sent the motor out to the shop.
  - From: The Murphy-Fahlgren Family <efhome@master.adams.com>

Prev by Date: RE: A Arm bushes/torqueing
Next by Date: sending parts
Prev by thread: Re: project 4ktq update: Sent the motor out to the shop.
Next by thread: Re: Can you think of anything else?
Index(es):
- Date
- Thread