Re: Wiring question

[Huw Powell <audi@mediaone.net>]

> Yes, easy to switch.  BUT, you'll lose your side marker light (the one next to the headlight), as it will now be in the bumper (facing forward, only).
> 
>
> On the 87 4kcsq, the front turn signal is mounted in the bumper, next to the
> "fake" driving lights.  The parking lights are mounted exterior to the
> headlamps.  Is it possible to "switch" these locations without too much
> difficulty? 

better to drive the corner marker with a relay, triggered by the signal
wire and the park light wire.  Since the park light wire is grounded
when off, ditto the signal, you get no light when both are off, light
with parking lights, and when the signal is activated it flashes,
whether the light is on already or not.  btdoing that.  

PS I also used a socket out of an 87 5k that held a two pin bulb and run
the bumper light as signal and marker.  woudl have done that tot he
corner light but there is no socket I could find that holds a two
filament bulb and fits there.

-- 
Huw Powell

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250