Re: k24/26 hybrid aka RS2

[OorQue@aol.com]

>  I have heard that the 2.5/2.6 conversions(95.5mm) arent all that well 
suited
>  to the turbo motor's, as it is does not like to rev like the 86.5mm stroke
>  motor's.

Nonsense ... although you do have to keep a careful eye on piston speed and 
acceleration rates, the trick here is to use lightweight pistons and rods to 
keep reciprocating mass down.  Increasing the wristpin size is a good idea, 
too.

FWIW, several tuners are using 95.5mm stroke cranks in 20v motors with 
7000rpm redlines and they don't seem to have any problems with it.

JG