Fusibale link, quick, for fan motor protection

["Avi Meron" <avi@cosmoslink.net>]

Boys and girls,
Below is another way to install a fusible link to protect your cooling fan
motor.

Here is the information regarding the fuse, I picked mine up at Kragen auto
parts:
It is made by "Buss Fuses" (Japanese made fuse)
It is BP/FLB 70 (70 Amp) or you can get BP/FLB80 (80 Amp)

Install procedure:
Disconnect ground wire (brown) at fan motor (10mm nut)
Connect fuse to fan motor post using above nut
Connect ground wire to the fuse using a 10mm short bolt and a nut
Make sure you buy two fuses (for replacement purpose)

You are done, isn't that peachy?

Regards,
Avi