[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Throttle body modification

To: Christopher Gharibo <cgharibo@usa.net>
Subject: Re: Throttle body modification
From: Huw Powell <audi@mediaone.net>
Date: Wed, 22 Sep 1999 22:52:12 -0400
CC: 20V List <audi-20v@boldfish.com>, Quattro List <quattro@audifans.com>
Organization: HUMAN Speakers
References: <19990923011200.52.qmail@aw162.netaddress.usa.net>
Reply-To: one@humanspeakers.com
Sender: owner-quattro@audifans.com

> I have a '91 Audi CQ.
> 
> There is a wedge like restrictor on the throttle body intake valve.  This
> certainly restricts the air flow at a certain throttle range.
> 
> What kind of improvement can I expect if I remove this piece?

you will probably mess up your slightly open throttle smoothness (of the
power curve, driveabilitywise)

> 
> What are the recomendations in going about removing this piece?

Don't lose the screws.

-- 
Huw Powell

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250

Follow-Ups:
- Re: Throttle body modification
  - From: -=Bob=- <mx@snet.net>

References:
- Throttle body modification
  - From: Christopher Gharibo <cgharibo@usa.net>

Prev by Date: Re: Ur-Q ... buyer's market or seller's market?
Next by Date: Re: coupla MC motor questinons..
Prev by thread: Throttle body modification
Next by thread: Re: Throttle body modification
Index(es):
- Date
- Thread