Diff lock problems resolved

[Gfbourcier@aol.com]

Listers,
After cleaning the crud out of the white vacuum hose left over from cutting 
it for the extension, vac pressure is back, everything works fine, but the 
LED's still don't light up.  The LEDs contain resistors, so I didn't blow 
them out.  I'm wondering if the previous switch had some voltage less than 12 
powering the lights.  The brown/yellow wire is powering one LED, brown/black 
powering the other, both grounds good.  LEDs are made by Linrose, model 
#B2191U5, 12V AC/DC, responds in range 6V to 13.5V.  Are my two power leads 
short on voltage by nature?
Thanks,
Gil Bourcier
Columbia, MD USA
87 4kcsq-84k mi. -- with locking diffs, just gotta feel it.