RE: '85 5000S climate control - no heat

["Livolsi, Stephane" <livols1@investorsgroup.com>]

BTDT! I use a set of long needle nose pliers to reach in and pull the
wire.
Stephane Livolsi
180 Yorston St
Williams Lake, BC, V2G 3Z1
ph 250-392-2637
fax 250-392-2693

'86 5KTQ stock (if you don't know what it means, you aren't in the club)

>----------
>From: 	Wallace White[SMTP:wallace@remdesign.com]
>Sent: 	October 11, 1999 6:05 PM
>To: 	Cynic5KS@aol.com
>Cc: 	steveb@cme.nist.gov; quattro@audifans.com
>Subject: 	Re: '85 5000S climate control  - no heat
>
>> as you are facing the front of the car... You can disconnect it from the
>> housing and manually move the leverage assembly back so you get heat... You
>> lose the climate control feature in the car, but it will definitely take
>>care
>> of those frosty mornings until you can get the thing fixed.
>
>You can also do this from inside the car: just remove the end of the
>cable from the programmer motor. I bet you can do this without removing
>the glove box and all, since you can just reach the programmer motor
>with the glove box open.
>
>- Wallace
>  '87 5kcstq 160k
>