URQ sorting out; compression test

[DGraber460@aol.com]

As I started to (painfully) disassemble the motor that I have spent the last 
month putting together, it occurred to me that checking the valve lash would 
be a good idea.
Results;

        #1  Ex= .011"
        #1   In = . 000"
        #2   Ex= . 007"
        #2   In = . 009"
        #3   In = . 006"
        #3  Ex= . 011"
        #4  In =  . 009"
        #4  Ex=  . 015"
        #5  In =  . 010"
        #5  Ex=  . 014"

I checked the #1 intake to see if the tappet barrel was free when the cam 
lobe was up. It turned freely at this point, so I know it wasn't held open 
continuously.
Any input on what valve clearance spec is for an URQ, and what these results 
could mean? These were all checked cold.
Hopefully have the head off tomorrow.

Dennis Graber
Denver