Re: Type 44 rear away bar

[Eric Fletcher <steadi@swbell.net>]

on 10/21/99 9:26 PM, JShadzi@aol.com at JShadzi@aol.com wrote:

> In a message dated 10/21/99 4:56:51 PM Eastern Daylight Time,
> ScottyCBoy@aol.com writes:
> 
> << Got some info on the elusive rear sway bar for type 44's. Seems some of
> the Audi V8's had it installed prior to "P" 93? model year. After 93 they all
> had, possibly a 4.2 item? The S4 92 model year had it. To update you must
> rplace the rear subframe and bearing housings using the appropriate bar and
> mounts.
> 
> Scott
>>> 
> 
> Wow, seems like a lot of work/expense to me.  Why not take an off the
> shelf 4000q/Coupe GT front bar and weld in some brackets to make it fit in
> the rear?  End links could be made with heim joints, and the bushings could
> be off the shelf Energy sway bar bushings.  This is what I did on my Coupe
> GT:  see   web.csuchico.edu/~javad
> Javad


Before I'd do all that I see if a rear bar on a would really do anything
(Which it won't)....


Eric Fletcher S.O.C.