Re: Audi 200 window adjustment problems

["Cobram ." <cobram@juno.com>]

 Mike Posner <posne@cts.com> writes:

>The passenger side front window  (power)  sheared the little rubber
>bonded to glass grommet which is located on the upper right
>rear portion of the front passenger window.  The  plastic  clip which 

>is some other mechanism which stops vertical  window travel.  I read the
>page in bentley  describing  the adjustments of the inner panel and 

If I recall correctly, there is a stop on the window regulator itself
that adjusts the window height.  It's a threaded piece with a 10mm
adjustment nut and a teflon "hat" on it that stops the regulator from
going too far up.  The grommets that follow the channels and go through
the glass are there to keep the window from popping out and over the
rubber seals.  Since the glass isn't square and doesn't ride a channel
all the way up, it needs these guides to keep it in place.

BCNU,


Cobram@Juno.Com
http://welcome.to/AudiV8Quattro

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.