Re: 944 turbo after-run pump report

[Wallace White <wallace@remdesign.com>]

Thanks for the report, Dan. We'll of course be interested to hear if it
ever fails. Some people here are on the P-list too, right? The mere fact
that you got a used one that works probably means it's a better design
than the Audi OEM one.

> It appears the Audi pump has two positive leads (not sure why) which were
> plugged into one side of the Audi connector, single ground was the other.

The positive wire is sort-of daisy-chained from one point to another;
that's why you see two wires at that connector.

> that one up.  To check whether your old pump is working (or in my case, to
> test the new one) disconnect the negative wire off the radiator fan, then

...or just remove the 1st speed radiator fan relay, in the underhood
relay panel.

- Wallace
  '87 5kcstq 160k