Re: Flashing coolant level warning on 200TQW

[Mike Posner <posne@cts.com>]

At 03:42 AM 11/04/1999 -0500, cobram@juno.com wrote:
>I have already checked the switch in the coolant reservoir, moves freely
>and makes positive contact.  Removed the plug from the switch and jumped
>it, indicator still flashes.  Checked the wiring diagram, grounded the
>brown/yellow plug that goes to the four pronged multiswitch under the
>gooseneck, light still flashes.  Plugged the multiswitch connector to a
>known good switch (switch was well grounded by battery jumper cable),
>light still flashes.  Makes no difference if engine is hot or cold. 
>Checked connections at all temp sensors.  
>

>
>
>Any suggestions?
>
>BCNU,
>
>Cobram@Juno.Com
>__>
>continuity_on wiring  to self check crcuit
board?_______________________________________________________________
>Get the Internet just the way you want it.
>Free software, free e-mail, and free Internet access for a month!
>Try Juno Web: http://dl.www.juno.com/dynoget/tagj.