[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CGT Fenders



> I was able to use the fender off my 84 coupe on my 86.  I used an
> appropriate size drill bit and a die grinder to make the holes square.  If
> only I had been able to find a square drill bit it would have been so much
> easier :-)  

Snap On makes square drill bits, not metric, but close enough.  Don't
remember the part number but I used one to put my rear bumper on.

-- 
Huw Powell

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250