[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Question
Hello again-
A quick question, I hope one of you has been
through before, but I don't remeber ever seeing it posted. I have a
coolant leak (surprise, surprise!) where the turbo coolant return line connects
to the block, down by the oil filter mount. It is a small section of hose,
ferrule crimped to the metal pipe. When I had a leak with a similar joint,
up at the top, where there is a trasition to metal pipe where the head water
outlet is, I used a piece of 3/8" ID high-temp hose and two
clamps.
My question is, is the lower one the same
size? I'd like to buy the hose before I take it all apart. It looks
like a b***h to get at! Any hints? Remove the alt?
Could this have anything to do with switching to
Dexcool? I did that 1 1/2 years ago, though.
Thanks so much-
Jeremy Walters
Napa, CA