[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Pistons for MC motor needed...

To: <bbell@surview.com>, <mpederson@bigfoot.com>, "'Audi S Car Mail List & Archives'" <audi-s-cars@lists.boldfish.com>, <quattro@audifans.com>, <audi-20v@lists.boldfish.com>
Subject: RE: Pistons for MC motor needed...
From: "Bruce Bell" <bbell04@ibm.net>
Date: Fri, 12 Nov 1999 09:59:11 -0700
Importance: Normal
In-Reply-To: <000c01bf2d2e$85838dc0$e9916420@fremontpeak>
Reply-To: <bbell@surview.com>
Sender: owner-quattro@audifans.com

OoooPs I meant Forged rather than cast on this line.

-----Original Message-----
From: Bruce Bell [mailto:bbell04@ibm.net]
Sent: Friday, November 12, 1999 9:51 AM
To: mpederson@bigfoot.com; bbell@surview.com; 'Audi S Car Mail List &
Archives'; quattro@audifans.com; audi-20v@lists.boldfish.com
Subject: RE: Pistons for MC motor needed...

According to the WCVWPH the tightest you can run a cast piston is .0381. It

References:
- RE: Pistons for MC motor needed...
  - From: "Bruce Bell" <bbell04@ibm.net>

Prev by Date: RE: Pistons for MC motor needed...
Next by Date: Re: nicked
Prev by thread: RE: Pistons for MC motor needed...
Next by thread: Throttle body observation..
Index(es):
- Date
- Thread