G60 and 4kq pad Dimensions

[Todd Phenneger <phen9461@uidaho.edu>]

I'm thinking of getting some Ferodo pads from a place closing them out.
But I fear that their PNs are off.  So maybe Pad dimensions would work.
They list a Ferodo Pad FDB-343 for the Early 200 turbo.  83-86.  Thats the
same as the ur-q caliper setup I believe.  But GPr lists the number as FDB
954.  At any rate, this pad is 119mm wide and 70mm thinkk.  I know the GPR
number is good but not sure about the other number.  maybe its just an old
number???
	Also, does anyone know if the ur-q pads will work in a 4kq.  Same
size but the ur-q pads are thicker. Are they to thick to work??Or has
anyone tried.  
GPr list 4kq front as FDB774A.  But in the other listing I show a FDB-123
and a 158 that are 18.5 and 19mm thick respectively.  Anyone know if these
are the 4kq pads.  Tis place has them for CHEAP.  Only 7 sets left
at.....$5 a set.  Thats for an END.  As in 45 is all you need for 4 pads.
etc...  Cheap.  
	also, can someone describe the difference betweent he MAF, AF, and
DS11 compunds???  GPR sells the AF compund only which is a good street
compund with occasional track use.  I drive int he snow a lot so good COLD
performance is crucial.
	Thanks

	Todd Phenneger
	1983 ur-q / black / getting a MC
	1984 4000 quattro / modified/ turbo conv almost done.
	1987 4000 quattro / Saphire Metallic Blue/ Girlfriend's
	1996 A6q / Volcano / Dads Car
   *****1985 5kt / PARTING OUT!