[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
changed cambelt and lifters now car won't start
Hi all
Been on this one all damn day today, I have replaced the cambelt, water pump
(thanks Huw) and lifters today on the Coupe Q '85, but now I can't get the
darn thing started.
1 the engine turns over fine by hand no resistance (ie valves hitting
pistons.
2. the cam moves and the rotor arm moves
3 the tdc marks line up on the cam cover/gasket and the crank pulley/bottom
cam cover
4 I have fuel ( I can smell it when I pulled the sparks)
when I crank over with the starter with plugs and leads attached, it turns
over for a second and then stops with starter sounding like it is stuck.
I did unfortunately move the rotor arm during the course of events today but
put it back to where I thought it should be ie no 1 plug lead.
Some help please would be greatly appreciated.
TIA
Iain