[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Broke another part of my 4kq.... UPDATE!!!!!!!!!
Well Here is an update on my problem....
I checked the fluid thing and there is plenty of fluid.....
I checked the belt and it is still attatched and it is not muddy....
I looked at the hoses comming and going from the Power steering pump and
they appear fine...
I turned on the car and tryed to turn the wheel and it was still hard to
turn, I did look inside the power steering thing at this time, and it
appeared to me that no fluid was going anywhere, but that is just my guess
and I am not too good at guessing....
Could I have cut a line some where? I don't think I would have broken
the steering gear box anywhere because I can still move the wheel (it is
very hard though)
Do you think I could have burnt out the Power steering pump?
Thanks for all your help!!!!!
Mike.....
> Well this evening I knew that I was going to do something to my car,
a
| >white 86 4kcsq, ) and I finally did... I think I broke the power
steering.
| >You see I was driving around in circles in some mud, when all of a sudden
it
| >became very hard to steer. It turns out that I can steer at high speed,
| >anything over 20, but at low speeds it takes both hands to turn the
steering
| >wheel.... I think that might be caused by me sliding from some mud on to
| >the road. What should I do? Is it very hard to fix the
| >power steering? Also does anybody have any helpful advice that would
help
| >me with this project?
|