[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: re Re: ABS'ness
Yes, Brett is correct; I was too cavalier with my terminology. Meum culpum.
kirby
> -----Original Message-----
> From: Brett Dikeman [SMTP:brett@pdikeman.ne.mediaone.net]
> Sent: Wednesday, November 17, 1999 08:42
> To: Smith, Kirby A; 'Quattrolist'
> Subject: Re: re Re: ABS'ness
>
> At 7:49 PM -0500 11/16/99, Smith, Kirby A wrote:
> >One can also get ABS activation at slow speeds if the teeth (cogs) on the
> >axle are broken or rusted off. BTDT
>
> the teeth are on the hub, not axle, at least on type 44's. I would
> recommend cleaning the teeth with a wire brush wheel on a drill or a
> dremel.
>
> Brett
>
> ----
> Brett Dikeman
> Artel Software 617-451-9900
> 381 Congress Street 617-451-9916(fax)
> Boston, MA 02210 http://www.borisfx.com